搜索结果: 1-15 共查到“纺织技术 properties”相关记录24条 . 查询时间(0.249 秒)
Effect of Workwear Fabric Characteristics on the Changes in Tensile Properties of Sewing Threads after Sewing
Tenacity Breaking elongation
2010/9/20
During sewing at high speed, the needle thread is subjected to repeated tensile stresses, heat, bending, pressure, torsion and wearing. These stresses act on the thread repeatedly and the thread passe...
Influence of the Plastification Drawing Conditions and Distribution of Drawing Ratios on the Structure and Properties of Fibres Made of a Polyimidoamide Nanocomposite Containing Montmorillonite
polyimidoamide nano-composites fibres montmorillonite
2009/6/17
The influence of a single- and two-stage drawing process on the structure and properties of fibres made from a polyimidoamide (PIA) nano-composite containing montmorilloniten (MMT) were investigated. ...
Antibacterial Properties of Silver-Finished Textiles
silver nano-particles silver submicro-particles silver-finishedtextiles
2009/6/15
In this paper, the results of research on the bacteriostatic efficacyofselectedsilverparticles:
nano-Ag, sub-micro-Ag, AgCl in the finishingoftextilesarepresented.Theshapeandsize of the silver compou...
Effect of Balloon Angle on the Hairiness and other Yarn Properties of Polyester Ring Spun Yarn
balloon angle yarn hairiness yarn properties traveller weight
2009/6/15
In this research the effects of the yarn balloon angle on yarn hairiness and other yarn propertieswas investigated. The yarn balloon was changed by use of fivedifferentweightsof
C type travellers. Th...
Influence of Static and Dynamic Loading on the Properties of Handmade Persian Carpet
Tanned wool Physical and mechanical properties Carpet thickness
2009/5/8
The paper reports the physical and mechanical properties of hand-woven carpets, which have been under static and dynamic forces. Two groups of wool fibres, from two parts of Iran, were prepared to s...
Effects of Cross-Sectional Shape of Yarn Duct of Interlacer on the Properties of Interlaced Yarn
Interlacer Interlaced yarn Number of tangles Strength of tangles
2009/4/15
This study deals with the effect of cross-sectional shape of yarn duct of interlacer on the performance of interlaced yarn and aims at finding the interlacers with better performance. The performance...
The Effect of Pretreatment on the Environment and Dyeing Properties of a Selected Cotton Knitted Fabric
cotton pretreatment bleaching dyeing ecological parameters
2009/2/17
The current preparation of cotton knitted fabric prior to dyeing mainly involves a combined
process consisting of scouring and peroxide bleaching. In this research two pre-treatment
procedures, i.e....
Neural Model of the Spinning Process Dedicated to Predicting Properties of Cotton-Polyester Blended Yarns on The Basis of The Characteristics of Feeding Streams
yarn blends cotton polyester-fibres rotor spinning yarn quality parameters
2009/2/17
The subject of our research were yarns manufactured from cotton-polyester blended slivers, as well as pure cotton and polyester slivers with the use of a BD 200S rotor spinning frame. Partial models o...
Comparing the Physical Properties of Produced Sirospun and New Hybrid Solo-Siro Spun Blend Wool/Polyester Worsted Yarns
Solospun roller Wool/Polyester fibres Sirospun Solo-Siro spun hairiness yarn properties.
2009/2/17
The aim of this paper is to present the utilisation of a Solospun roller in the Sirospun spinning system in order to improve the properties of worsted wool/polyester yarns, especially the yarn hairine...
Thermal Comfort Properties of Some Knitted Structures
knitted fabrics thermal comfort thermal resistance thermal absorptivity
2009/2/16
In this paper, the thermal properties of cotton and polyester based single jersey of 1×1 rib and interlock structures were statistically investigated. The thermal properties of samples were measured u...
The Effects of Heat-setting on the Properties of Polyester/viscose Blended Yarns
heat setting twist setting twisting temperature polyester (PES)
2009/2/16
30 tex and 20 tex yarn bobbins consisting of 67% PES - 33% viscose were subjected to heat-setting at 90 °C & 110 °C, and under a pressure of 630 mmHg in order to investigate the effects of heat-settin...
An Investigation into the Tensile Strength, Pilling and Abrasion Properties of Woven Fabrics Made from Conventional and Compact Ring-Spun Yarns
compact woven fabric tensile strength pilling, abrasion
2009/2/13
Most of the scientific studies on compact spinning, which is a modified version of ring spinning, have hitherto been focused on the properties of yarns and knitted fabrics. Yarns are subjected to inte...
Influence of Selected Process Variables on the Mechanical Properties of Core-Spun Vortex Yarns Containing Elastane
elastane core-spun yarn vortex spun yarn cotton yarn
2009/2/11
In this experimental study, we investigated the effects of nozzle pressure, delivery speed and elastane content on the mechanical properties of core-spun yarns produced using the Murata vortex spinnin...
The Influence of Component Yarns’ Characteristics and Ring Twisting Frame Settings on the Structure and Properties of Spiral, Loop and Bunch Yarns
fancy yarns spiral loop bunch ring twisting statistical models
2009/2/11
The aim of this research is to provide reliable information, provided in the form of statistical models, regarding the possibilities of modifying the structure and the mechanical properties of fancy y...
Process of Warp Knitting Mesh for Hernia Repair and its Mechanical Properties
hernia warp knitting medical textile mechanical property
2009/2/9
Polypropylene monofilament is selected to fabricate the mesh used for hernia repair, and the mesh is warp knitted on a Tricot machine with a compound needle (gauge E 18); an atlas structure is used. T...