搜索结果: 1-15 共查到“工学 Plastic deformation”相关记录19条 . 查询时间(0.06 秒)
Computational Aspects of Elasto-Plastic Deformation in Polycrystalline Solids
Computational Aspects Elasto-Plastic Deformation Polycrystalline Solids
2015/7/1
The overall elasto-plastic behavior of single crystals is governed by individual slips on crystallographic planes, which occur when the resolved shear stress on a critical slip system reaches a certai...
The influence of initial plastic deformation on microstructure and hot plasticity of α+β titanium alloys
Titanium alloys Thermomechanical process Hot deformation Heat treatment β-solution
2010/8/17
Two phase titanium alloys most often are hot deformed, mainly by open die or die forging. Achievement of desired mechanical properties is related to development of proper microstructure in plastic wor...
The influence of the temperature of plastic deformation on the structure and mechanical properties of copper alloys CuCo2Be and CuCo1Ni1Be
Metallic alloys Copper alloy Plastic instability Portevin–Le Chatelier effect
2009/12/3
Purpose: The aim of the paper is to determine the influence of temperature of plastic deformation on the structure and mechanical properties of copper alloy of the CuCo2Be and CuCo1Ni1Be during a tens...
Influence of severe plastic deformation by the ECAP method on structure and properties of the P2-04BCh steel
Nanomaterials Low-carbon steel ECAE deformation
2009/12/3
Purpose: Maim aim of this paper is to describe the plastic deformation executed by ECAE of low carbon steel. The ECAE method lead to significant improvement of strength of investigated material.
Desi...
Influence of plastic deformation on structure and mechanical properties of stainless steel type X5CrNi18-10
Metallic alloys Austenitic stainless chromium-nickel steel Plastic deformation
2009/12/2
Purpose: The paper analyzes the influence of the degree of cold deformation on the structure and mechanical
properties of austenitic stainless steel X5CrNi18-10.
Design/methodology/approach: The ...
Using severe plastic deformation to prepare of ultra fine - grained materials by ECAP method
Severe plastic deformation Die geometry Microstructures analyse
2009/12/1
Purpose: The purpose of the paper is to design a tool and propose a procedure for verification of development
of structure at equal channel angular pressing. The goal is to obtain after extrusion th...
Microstructure of ultrafine-grained Al produced by severe plastic deformation
Nanomaterials Al Transmission Electron Microscopy
2009/12/1
Purpose: The structure of Al subjected to severe plastic deformation by means of compression with oscillatory torsion
and by combined method (compression followed by compression with oscillatory tor...
Mechanical and service properties of low carbon steels processed by severe plastic deformation
severe plastic deformation (SPD) ECAP low carbon steel submicrocrystalline structure
2009/10/23
The structure and properties of the 0,09% C-Mn-Si-Nb-V-Ti, 0,1 %C-Mn-V-Ti and 0,09% C-Mo-V-Nb low-carbon steels were studied after cold equal-channel angular pressing (ECAP). ECAP leads to the formati...
Theoretical And Experimental Analys Of Plastic Deformation Heat For Pim-Ring Sliding System Under Dry Friction Conditions
Sliding Friction Plastic Deformation Frictional Heat
2009/10/15
In this study, a theoretical model which can ensure the calculation of plastic deformation heat occured at the worn surfaces due to the friction during sliding was established and the validity of the ...
Elastic-Plastic Deformation of a Tube with Free Ends Subjected to Internal Energy Generation
Elastic-plastic thermal stresses internal energy tube
2009/10/13
The elastic-plastic deformation of a tube with free ends subjected to uniform internal energy generation is evaluated using Tresca's yield condition and the associated flow rule. Yielding starts at th...
华南理工大学机械工程材料课件 lesson5-ch3-plastic deformation and recrystallize_v2
机械工程材料 课件 plastic deformation and recrystallize_v2
2009/3/23
华南理工大学机械工程材料课件 lesson5-ch3-plastic deformation and recrystallize_v2。
Microstructure transformation during plastic deformation of the austempered ductile iron
Austempered Ductile Iron TRIP (Transformation Induced Plasticity) Cold work Microstructure Phase analysis
2011/3/29
Excellent properties of ADI (Austempered Ductile Iron) are widely praised by the world technical literature. These properties depend on the cast iron microstructure formed during the heat treatment pr...
Microstructure transformation during plastic deformation of the austempered ductile iron
Austempered Ductile Iron TRIP (Transformation Induced Plasticity) Cold work Microstructure Phase analysis
2011/3/29
Excellent properties of ADI (Austempered Ductile Iron) are widely praised by the world technical literature. These properties depend on the cast iron microstructure formed during the heat treatment pr...
Rate-dependent serrated flow and plastic deformation in Ti45Zr16Be20Cu10Ni9 bulk amorphous alloy during nanoindentation
nanoindentation AFM TEM metallic glass
2010/10/12
The plastic deformation of Ti45Zr16Be20Cu10Ni9 bulk metallic glass has been investigated by
nanoindentation performed with loads ranging from 10 to 200mN in a wide range of loading
rates. The plasti...
Influence of plastic deformation on CCT-diagrams of low-carbon and medium-carbon TRIP-steels
Metallic alloys TRIP-steel CCT-diagram
2010/2/4
Purpose: The aim of the paper is to investigate the influence of plastic deformation and cooling conditions on a structure and a shape of CCT-diagrams of new-developed TRIP-aided microalloyed steels.D...