搜索结果: 1-12 共查到“Binders”相关记录12条 . 查询时间(0.06 秒)
【国际会议】Waste Plastic Modified Asphalt Binders and Mixtures（线上）
长安大学公路学院 Waste Plastic Modified Asphalt Binders Mixtures
2023/4/23
【国际会议】Waste Plastic Modified Asphalt Binders and Mixtures（线上）详情见下文：
Tannin–Phenol Formaldehyde Resins As Binders for Cellulosic Fibers: Mechanical Properties
Tannin Tannin-formaldehyde Resins Phenol- formaldehyde Resins Mechanical Properties
2013/3/8
In this study Eucalyptus tannin (T) was isolated from outer bark of Eucalyptus trees; as sodium phenoxide salt and used as extender or copolymer into phenol formaldehyde (PF) resin at five percent (10...
Polysialates binders preparation and their influence to shear strength of foundry sand mixtures
Product development Innovative foundry technologies and materials
2011/3/15
This paper deals with polysialates water-glasses preparation. There were used various procedures with the goal to create inorganic polymer on silicon and aluminum base. The one composed of SiO2 and Al...
Rheological Properties of Mixtures of 316L Stainless Stell Powders With Polyproplylen Based Binders
Powder Injection Molding (PIM) Feedstock Binder Rheology
2009/10/14
The flowabilities of feedstocks for powder injection molding (PIM), of 316L stainless steel powders (mean diameters 5.84, 30.42, 40.35, 67.42 μm) with thermoplastic binders (60% paraffin, 35% polyprop...
Effect of additives promoting the formation of lustrous carbon on the knocking out properties of foundry sands with new inorganic binders
Innovative foundry materials and technologies inorganic binders lustrous carbon knocking out properties strength
2011/3/29
The article presents the results of investigations, which make a fragment of the broad-scale studies carried out as a part of the statutory activity on optimising the foundry sand technology using new...
Effect of additives promoting the formation of lustrous carbon on the knocking out properties of foundry sands with new inorganic binders
Innovative foundry materials and technologies inorganic binders lustrous carbon knocking out properties strength
2011/3/29
The article presents the results of investigations, which make a fragment of the broad-scale studies carried out as a part of the statutory activity on optimising the foundry sand technology using new...
On the measurement of surface tension in binders used for moulding sands
Foundry technology Moulding sands Binders properties Surface tension of binders
2011/3/15
The surface tension of foundry binders is a very important parameter affecting the properties of a sand-binder system. Combined with other parameters, its value determines an outcome of the process of...
Application of microwave energy for curing of molding sands containing oil binders
Microwave drying Core sands Oil binder Microwaves Characteristics of molding sands
2011/3/15
This works presents the results of studies concerning possibility of application of microwave heating in the curing process of molding sands containing oil binders. Molding sands prepared with three k...
Investigating the kinetics of the binding process in moulding sands using new, environment-friendly, inorganic binders
Innovative materials and foundry technology New inorganic binders
2011/3/15
The article discusses the results of an investigation carried out on the chemically bonded and CO2 blown moulding sands using selected, modified inorganic binders. The investigations make an important...
Behaviour of moulding sands with hydrophilic binders in dry air
Ultrasonic Moulding sand Surface layer
2011/3/11
The work presents results of research on changes of elasticity and durability properties of moulding sands with a hydrophilic binder. The research concerns the surface layer of a mould. The presented ...
EVALUATION OF WETTABILITY OF BINDERS USED IN MOULDING SANDS
foundry technology moulding sands binders properties binders wettability measurements
2011/3/10
Binders used in moulding sand have the differential properties. One of the main parameters influencing on moulding sand properties is wettability of the sand grain by binding material.
The Effects of High Pressure and Various Binders on the Physico-chemical Properties of Restructured Pork Meat
High Pressure Restructured Non-meat Protein Binding Physico-chemical
2016/4/22
This study was carried out to investigate the effect of high pressure and the addition of non-meat proteins on the physico-chemical and binding properties of restructured pork. Pressurizations were ca...