搜索结果: 1-10 共查到“有色金属及其合金 Corrosion”相关记录10条 . 查询时间(0.135 秒)
Corrosion behaviour of the welded steel sheets used in automotive industry
Corrosion behaviour welded steel sheets automotive industry
2010/8/12
The enormous usage of thin steel sheets for automotive application for reducing car weight necessitates improved material strength in addition to higher corrosion protection. Hot dip galvanizing of st...
Corrosion resistance of NiTi alloy in simulated body fluids
Biomaterials Metallic material Corrosion
2009/12/1
Purpose: Corrosion resistance of an implant alloy is a very important determinant of its biocompatibility. The
nature of an environment and surface treatments have a significant influence on corrosi...
Stress Corrosion in Gold Alloys.
Tarnish and Corrosion Behaviour of Dental Gold Alloys
Tarnish Corrosion Behaviour Dental Gold Alloys
2009/7/30
Tarnish and Corrosion Behaviour of Dental Gold Alloys.
Micromorphological Studies of the Corrosion of Gold Alloys.
Corrosion and wear behaviors of Al-bronzes in 5.0% H2SO4 solution
Al-bronze corrosion friction wear strain hardening
2010/3/17
Steady-state corrosion and wear behaviors of two Al-bronzes, Cu-14Al-X and QAl9-4, in 5.0% H2SO4 solution were investigated. It is found that wear loss of bronzes in 5.0% H2SO4 solution is lower than ...
Microstructure and corrosion characteristics of laser-alloyed magnesium alloy AZ91D with Al–Si powder
laser alloying magnesium alloys intermetallic compounds (IMCs) corrosion
2010/10/12
Blown-powder laser surface alloying was performed on the magnesium alloy AZ91D with
Al–Si alloy powder to improve corrosion resistance. Characterization by scanning electron
microscopy (SEM), energy...
期刊信息
篇名
Corrosion mechanism of mechanically alloyed Mg50Ni50 and Mg45Cu5Ni50 alloys
语种
英文
撰写或编译
作者
Zhang Yao, Chen Li-xin, Lei Yong-quan
第一作者单位
刊物名称
Trans. Nonferrous MetalsTran S
页面
2002, 12(2):238-2...
Corrosion resistance of Mg-RE-Zr alloys
Metallic alloys Methodology of research Corrosion Microstructure
2010/2/22
Purpose: Magnesium alloys are widely used in the automotive and aerospace industries. Data concerning corrosion of Mg alloys are numerous, but those concerning Mg-RE alloys are scarce. In this paper, ...
Structure, mechanical properties and corrosion resistance of AlMg5 and AlMg1Si1 alloys
Corrosion Stress corrosion cracking Aluminium Mechanical properties
2010/2/22
Purpose: The main task of this work was to define the optimum heat treatment parameters so as to received the alloys resistant for stress corrosion cracking, within the limits of the corrosion factor,...