工学 >>> 力学 农业工程 林业工程 工程与技术科学基础学科 测绘科学技术 材料科学 矿山工程技术 石油与天然气工程 冶金工程技术 机械工程 光学工程 仪器科学与技术 动力与电气工程 能源科学技术 核科学技术 电子科学与技术 信息与通信工程 控制科学与技术 计算机科学技术 化学工程 纺织科学技术 印刷工业 服装工业、制鞋工业 轻工技术与工程 食品科学技术 土木建筑工程 水利工程 交通运输工程 船舶与海洋工程 航空、航天科学技术 兵器科学与技术 环境科学技术 安全科学技术 工业设计
搜索结果: 1-15 共查到工学 wear相关记录67条 . 查询时间(0.093 秒)
Welcome to the 21st International Conference on Wear of Materials, which will take place in California, USA from the 26-30 March 2017.The conference will focus on both the fundamental and applied aspe...
CMOS feature size scaling has been a source of dramatic performance gains, but it has come at a cost of on-chip wear-out. Negative Bias Temperature Instability (NBTI) is one of the main on-chip wear-o...
The effect of destabilization heat treatment on the microstructure, hardness, fracture toughness and abrasive wear resistance of high chromium hardfacing was investigated. The results from the study...
A system in a random environment is considered. The influence of the external conditions is governed by a Markovian arrival process. The internal structure of failure and repair are governed by phase-...
The roller-scraper tribosystem of Automatic Teller Machine (ATM) plays an important role in reliable cash requests. However, the abrasive wear of the polymer tribosystem becomes a prominent problem wh...
考虑轮胎接地摩擦的非线性特性,建立了基于侧向变刚度的轮胎多边形磨损模型,并对系统的稳定性进行了分析,指出轮胎的自激振动是一种由系统Hopf分岔引起的稳定周期振动现象,通过数值仿真得到了引起胎面自激振动的车速和车轮前束角范围。结果表明:轮胎多边形磨损为一种典型的非线性自激振动现象,其发生与胎面的侧向振动有关,磨损边数近似等于胎面的侧向振动频率与车轮转动频率之比。所建模型能够很好地解释轮胎多边形磨损的...
The use of coatings and surface engineered components is increasing and is driven by the need for improved hardness, corrosion and wear resistance [1]. Austenitic stainless steels are the most importa...
Currently, the most widespread use have found the composite materials with the light metals matrix, and especially from the aluminium alloys, reinforced with the ceramic particles or fibres that can b...
The technique of depositing of the hard and thin coatings is one of the most spectacular aspect of the materials engineering development in the last years. The physical vapour deposition (PVD) method ...
A problem of machine parts wear decrease and in this way of the economical effectiveness of rapid wearable parts interferes with majority of manufacturing processes. Service life and operating reliabi...
采用UMT-2多功能摩擦磨损实验机,模拟内燃机凸轮/滚轮工况条件,考察了多种激光微造型形貌试样表面的摩擦磨损特性。实验结果发现,与未处理光滑表面相比,激光微造型试样表面的耐磨、抗擦伤性显著提高,其中,凹坑造型表面的摩擦因数显著下降,而凹槽表面的摩擦因数相对较大。这说明凹槽形貌会增大表面摩擦,而凹坑形貌具有一定的减摩效果。合理选择凹坑的深度及其面积占有率,并进行微形貌几何参数的优化组合,可达到最佳减...
使用4种硬质合金涂层和非涂层刀具材料进行铁基高温合金GH2132的高速干车削试验,采用电子扫描显微镜(SEM)观察刀具的磨损形貌,通过能谱分析(EDS)分析磨损表面的元素分布,并对刀具的主要磨损机理进行分析。研究结果表明,使用硬质合金刀具材料高速干车削铁基高温合金GH2132时,刀具的磨损机理主要为粘结磨损、扩散磨损、氧化磨损并伴有少量的微崩刃。高速切削时刀具的前刀面磨损形态不同于常速切削时的磨损...
Purpose: The purpose of the paper is to investigate effects of external loads on erosive wear. Design/methodology/approach: In this experimental study, specimens were placed on specially designed a s...
Purpose: This research was done to study the tribological behavior of twist HS6-5-2 drills covered with Cr/CrN/CrN+Cr2N/Cr(C, N) and Cr/CrN/ Cr(C, N) coatings as well as to obtain detailed information...
Purpose: Purpose of this research was to demonstrate tool wear by hard turning of martensitic stainless steel and this material is pronounced as difficult to machine material. The evaluation was done...

中国研究生教育排行榜-

正在加载...

中国学术期刊排行榜-

正在加载...

世界大学科研机构排行榜-

正在加载...

中国大学排行榜-

正在加载...

人 物-

正在加载...

课 件-

正在加载...

视听资料-

正在加载...

研招资料 -

正在加载...

知识要闻-

正在加载...

国际动态-

正在加载...

会议中心-

正在加载...

学术指南-

正在加载...

学术站点-

正在加载...